training:pacnog21:0-setup
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
training:pacnog21:0-setup [2017/10/18 10:38] – created philip | training:pacnog21:0-setup [2018/04/07 17:38] (current) – [Introducing the lab] philip | ||
---|---|---|---|
Line 4: | Line 4: | ||
===== Objective ===== | ===== Objective ===== | ||
+ | This lab sets up the dual stack infrastructure which will be used for the rest of the topics explored in this workshop. | ||
- | |||
- | Using a dual stack topology, this lab investigates securing the router and the routing infrastructure for the network. | ||
===== Lab Topology ===== | ===== Lab Topology ===== | ||
Line 22: | Line 21: | ||
==== Introducing the lab ==== | ==== Introducing the lab ==== | ||
- | This workshop uses Cisco IOS routers running IOS, but on the Dynamips | + | This workshop uses Cisco routers running IOS, but on the Dynamips |
The lab will have been preconfigured by the instructors, | The lab will have been preconfigured by the instructors, | ||
Line 155: | Line 154: | ||
You will need a similar configuration for the Peering, Access and Border router as well. | You will need a similar configuration for the Peering, Access and Border router as well. | ||
- | ==== Links to other Routers ==== | ||
- | |||
- | Now we will configure the router physical interfaces according to the diagram. | ||
- | |||
- | The configuration example below shows what to do for the link between CX and BX. You will need to set up similar configuration for the links between CX and AX and between CX and PX. | ||
- | |||
- | **On CX:** | ||
- | |||
- | |||
- | interface GigabitEthernet1/ | ||
- | | ||
- | ip address 100.68.X0.17 255.255.255.252 | ||
- | no ip directed-broadcast | ||
- | no ip redirects | ||
- | no ip proxy-arp | ||
- | ipv6 address 2001: | ||
- | ipv6 nd prefix default no-advertise | ||
- | ipv6 nd ra suppress all | ||
- | no shutdown | ||
- | ! | ||
- | |||
- | |||
- | **On BX:** | ||
- | |||
- | |||
- | interface GigabitEthernet1/ | ||
- | | ||
- | ip address 100.68.X0.18 255.255.255.252 | ||
- | |||
- | You will need a similar configuration for the Peering, Access and Border router as well. | ||
==== Links to other Routers ==== | ==== Links to other Routers ==== |
training/pacnog21/0-setup.1508283507.txt.gz · Last modified: 2017/10/18 10:38 by philip